Back to all stories

How Long Does It Take To Place 20 Yards of Material?

Written by InterQuip USA LLC on July 1, 2019
AT7 Material Slinger


» 21,000 lbs.   » 22′ (L) x 8′ (W) x 9’2″ (H)   » 7-cubic yard capacity  
» 14′ long shot belt  » 2-speed hydraulic drive

How do you measure equipment success? Is it versatility? Uptime? The ability to go where traditional equipment cannot? If so, then the success of the un-manned, remote control, four-wheel-drive all-terrain AT7 material slinger is limited only by the operator’s imagination. 

Keep its 7-cubic yard hopper full of material, and the AT7 will keep slinging at distances up to 150′, which means that this slinger can stay on the job site with minimal downtime.

Did you know it takes 20 hours to place 20 yards by shovel?
2 hours to place 20 yards by skidsteer?
Rent our AT7 Material Slinger to place 20 yards in 8 minutes! 

» Remote Access. With its radio remote controls and dual-speed tracking, the AT7 material slinger is easy to maneuver in limited access areas. Position the AT7 for work, then stand at the best vantage point for your safety and accuracy. Place material using its all-wheel drive and 3-way steering.

» Adjustable Leveling. The AT7 material slinger has an automatic tilting feature that keeps it level even on slopes to provides stability and continuous feeding.

» On-Site Loading. At six feet high, you can load the AT7 material slinger from the rear with a small skid steer or from the side with a larger loader.

» Extreme Accessibility. The AT7 material slinger has all-wheel drive and Off -Road Traction Floatation Tires for off road mobility.

Slingers do the work, so you don’t have to!

» Backfill & Utility Trenching
» Dry Concrete & Asphalt
» Construction Site Work
» Compost, Soil & Mulch
» Erosion Control
» Flood Control
Fuel Tanks & Pipelines
» Landscaping
» Reloading
» Retaining Walls
» Roadside Work
» Water Retention

Download Brochure

Daily, Weekly, and Monthly Rental Rates Available


Fill out the form below for more information:
  • This field is for validation purposes and should be left unchanged.