Once you’ve selected the conveyor model, length, belting and motor for your needs, don’t forget to add on standard accessories to maximize the performance of your EASIKIT Conveyor in your unique environment.
DISC RETURN ROLLERS
Fitted with metal discs to help prevent material buildup on the roller itself. Recommended for use with sticky or difficult materials.
Only suitable for use with plain or cleated belt. Not required for chevron belting.
*Note: Disc return rollers supplied as standard with EK450.
AUTO GREASE UNITS
This is a self-contained unit to automatically lubricate the bearing over a period of one to twelve months. Once fitted and activated, it will work without attention until its allotted lifespan is over.
PRIMARY BELT SCRAPER
A cost-effective way to help prevent material carry-back on the return belt when conveying viscous material. Suitable for a plain belt and clipped or vulcanized joints, the primary scraper has a manually adjustable polyurethane blade and is mounted on the drive drum bearing for easy fitting.
|STANDARD Head Drive Unit Part No.||440||640||940||1240||1540|
|SNUB Head Drive Unit Part No.||n/a||642||942||1242||n/a|
SECONDARY BELT SCRAPER
Assist the primary scraper in helping to prevent material carry-back on the return belt. Suitable for a plain belt and clipped or vulcanized joints, the secondary scraper is mounted behind the primary scraper and shares the same bracket as the Primary Scraper mounted onto the drive drum bearing. The scraper has a manually adjustable polyurethane blade which provides a good back up when fitted with the primary scraper, especially when handling sticky material, i.e. sewage cake.
|STANDARD Head Drive Unit Part No.||441||641||941||1241||1543|
|SNUB Head Drive Unit Part No.||n/a||643||943||1243||n/a|
SELF-ADJUSTING BELT SCRAPER
This is the perfect solution for keeping your belt clean when access to the drive drum is difficult and you want peace of mind that your belt will be kept clean without the need to manually adjust the scraper blade. Ideal for conveyors in locations where low maintenance is required.
FINGER BELT SCRAPER
These are the ultimate option for keeping your belt clean. The heavy duty finger scrapers are suitable for cleaning chevron belt or plain belt if required. The scrapers come supplied complete with a heavy-duty mounting frame.
|FLAT BELT SCRAPER (5 finger blades with carbide inserts for use on all materials)||444A||644A||944A||1244A||1544A|
|CHEVRON BELT SCRAPER (7 finger blades with stainless steel inserts for glass, clay and hard to remove materials)||444B||644B||944B||1244B||1544B|
COVERS & SIDE GUIDES
Side guides are used to control spillage of loose, bulky material. Standard heights of 6” (150mm) and 12” (300mm) are available with continuous rubber side skirts.
|6″ High Part No.||445||645|
|12″ High Part No.||446||646|
*Note: Pricing and availability for EK1500 side guides available on request and dependent on the application.
SIDE GUIDE TOP COVERS
These top covers are designed to fit on top of our standard side guides. Provides the solution when required to have both a continuous rubber skirt on to the belt and an easily removable cover for maintenance.
Provided to enclose the running length of the conveyor with mesh panels, supplied in 3.3’ (1m EK450) or 4’ (1.2m) long sections and secured with nut and bolt fixings, they are supplied as an extra when needed for health and safety. They are a recommended requirement when using cleated or chevron belt.
SUPPORT STANDS & STRINGERS
Our modular support system for EASIKIT Conveyors is a cost-effective, combined design. The stands utilize a modular design with cross bracing for heights up to 20 ft. or higher, depending on site conditions.
|Stand||Height to Underside||EK450||EK600||EK900||EK1200|
*Note: Pricing and availability for EK1500 support stands available on request.
Fitted to the underside of the conveyor frame in modular 4’ (1.2m) and 8’ (2.4m) lengths. Provides adequate support for spans of up to 20 ft. centers (depending on loading). Constructed from galvanized ‘C’ section, thus increasing conveyor frame height by 3” (75mm). This can also be used as a cable tray.
|Conveyor Length||Part No.|